#Drivers gerber infinity 45 s install#
#Drivers gerber infinity 45 s drivers#
#Drivers gerber infinity 45 s driver#
#Drivers gerber infinity 45 s software#
#Drivers gerber infinity 45 s windows#

In this procedure you will verify your OMEGA version and install a Gerber P2C plotter in OMEGA via the USB or serial port. OMEGA 2.02 SP3 also supports USB connection for Gerber P2C Plotters. If you are using Gerber OMEGA Software, follow the detailed instructions in Installing Gerber P2C Plotters on page 7.Д§ Installing Gerber P2C Plotters 7 If you are using OMEGA, you must have OMEGA 2.02 Service Pack 3 or higher loaded on your computer to install or communicate to a Gerber P2C Plotter.

#Drivers gerber infinity 45 s software#

11 Install the Gerber P2C plotter in your software according to the software manufacturer's instructions. 10 Click Finish to close the Add New Hardware Wizard.

#Drivers gerber infinity 45 s driver#

9 Click Next > to install the driver from the Gerber P2C Driver Disk. 8 Click Next > to display the following dialog box which indicates that the wizard is ready to install the P2C Gerber Cutter driver. Click OK and the following Add New Hardware Wizard dialog box displays with the P2C Gerber Cutter in the Models list box. The driver file P2CUSB.inf displays in the File Name window.

Click the Have Disk button display the Open dialog box.Д¦ 6 7 Navigate to the CD-ROM drive of your computer. 6 Insert the Gerber P2C Driver Disk that was included with your plotter in the CD-ROM drive. 5 Click Next > and the following dialog box displays.

#Drivers gerber infinity 45 s drivers#

Choose the option: Display a list of all the drivers in a specific location so you can select the driver you want.ДҐ 5 4 Click Next > to display the list of devices. 3 Click Next > to display the following Add New Hardware dialog box. The Add New Hardware Wizard opens on your computer. 2 Plug the Gerber P2C plotter into a power source and turn on the plotter.

#Drivers gerber infinity 45 s windows#

To install the Gerber P2C USB driver in Windows 98 1 Connect one end of the supplied USB cable into the USB port on the back of your Gerber P2C plotter and connect the other end to a USB port on your Windows 98 computer. If you are using Gerber OMEGA Software, follow the detailed instructions in Installing Gerber P2C Plotters on page 7. 8 Install the Gerber P2C plotter in your software according to the software manufacturer's instructions. When installation is complete the following dialog box displays.Д¤ 4 7 Click Finish to close the Found New Hardware Wizard. 6 Click Next > to install the USB driver. Click Next > to display the Driver Files dialog box with the Gerber P2C USB driver located on your CD drive. 5 Insert the Gerber P2C Driver Disk that was included with your plotter in the CD-ROM drive of your computer.

Choose the option: Display a list of known drivers for this device so that I can choose a specific driver.ДЈ 3 4 Click Next > to display the Locate Drivers Files dialog box. 3 Click Next > to display the Install Hardware Device Drivers dialog box.

The Found New Hardware Wizard opens on your computer. To install the Gerber P2C USB driver in Windows Connect one end of the supplied USB cable into the USB port on the back of your Gerber P2C plotter and connect the other end to a USB port on your Windows 2000 computer. 6 Install the Gerber P2C plotter in your software according to the software manufacturer's instructions. 4 Upon completion of the USB driver installation the Completing the Found New Hardware Wizard dialog box displays.Дў 2 5 Click Finish to close the wizard. The Please wait while the wizard installs the software message displays. 3 Insert the Gerber P2C Driver Disk that was included with your plotter into your CD-ROM drive and click Next >. The Welcome to the Found New Hardware Wizard opens on your computer. To install the Gerber P2C USB driver in Windows XP 1 Connect one end of the supplied USB cable into the USB port on the back of your Gerber P2C plotter and connect the other end to a USB port on your Windows XP computer. You will need the Gerber P2C Driver Disk to complete the procedure. The following procedures describe installing the USB drivers using the Windows New Hardware Wizard for Windows XP, Windows 2000, and Windows 98 computers. 1 Installing the Gerber P2C Plotter USB Driver 1 You can install a Gerber P2C plotter using a USB connection and communicate with it using compatible design software.